Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle.
TESSA D. gave our service a 5 star review on 4/2/2025
SWAPPED FRONT TIRES AND VEHICLE NOW PULLS TO THE RIGHT. ALL 4 TIRES NEED REPLACEMENT. SCANNED CEL CODES – P0128 THERMOSTAT, P0171 INTAKE MANIFOLD GASKETS, P0442 & P0455 CANISTER PURGE SOLENOID, P0300 MISFIRE.
THERMOSTAT – Remove & Replace – In-Line6
STABILIZER BAR CONTROL LINK – Remove & Replace – At Control Arm,Link Kit,Both
DIAGNOSE BATTERY LIGHT ON AND NO AMPS ON GAUGE. REPLACED ALTERNATOR AND MADE NO DIFFERENCE
BODY CONTROL MODULE – Remove & Replace – w/o Luxury Console – [Includes: Programming.] – [NOTE: Labor estimates listed are for R&R only and DOES NOT include diagnosis time.]
PROGRAMMING
ALEXIS P. gave our service a 5 star review on 11/5/2024
FRONT STABILIZER LINKS NEED REPLACEMENT, FRONT STRUTS AND STRUT MOUNTS NEED REPLACEMENT, NEEDS PADS AND ROTORS ALL THE WAY AROUND. RF TIRE IS DRY ROTTING AND CHOPPING BAD DATE ON THAT TIRE IS 9/17, OTHER 3 TIRES ARE DATED 2020.
STABILIZER BAR CONTROL LINK – Remove & Replace – Both
DISC ROTOR – Remove & Replace – Front,Both – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
DISC ROTOR – Remove & Replace – Rear,Both – [Includes: Adjust Parking Brake.] – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
A/C COMPRESSOR DRIVE BELT – Remove & Replace – V8 – [Includes: Serpentine and V-Belt type Belt(s).]
SERPENTINE DRIVE BELT – Remove & Replace – [Includes: Serpentine and V-Belt type Belt(s).]
SHOCK &/OR STRUT ASSEMBLY – Remove & Install or Remove & Replace – Both – [DOES NOT include disassemble or alignment (where applicable).]
DUSTIN R. gave our service a 5 star review on 7/15/2024